Home > News > Industry News > Purchasing, maintaining and cleaning of tempered glass
News
Company News
Product News
Industry News
Certifications
Contact Us
SHENZHEN SUN GLOBAL GLASS CO., LTD Address: 3F, QIHANG BUSINESS BUILDING, SHENFENG ROAD, LIUYUE, LONGGANG, SHENZHEN, GUANGDONG, CHINATel : 0086 755 84...
Contact Now

Purchasing, maintaining and cleaning of tempered glass

Purchasing, maintaining and cleaning of tempered glass

kim www.sggglassmanufactuer.com 2016-11-27 21:05:50
Toughened glass is a deep-processed glass product made by cutting, edging, washing, drying and then heating it to near glass softening temperature according to product requirements, and rapidly cooling it.

Appearance check quality

View the appearance of the product quality. Toughened glass should not have cracks, missing angle; burst edge and scratch should not exceed GB15763.2-2005 standard requirements. At the same time, the production of glass used in the original glass, the quality should be consistent with the requirements of the corresponding product standards, glass defects caused by the original glass of the appearance of quality defects should meet the corresponding product standards.

The skills of maintaining tempered glass

1, attention to protect the corners of the tempered glass

If the tempered glass corners are damaged, the risk of glass blew will multiply. Because the tempered glass of the stress point all concentrated in the corner, corner protection is particularly important for the corners of the damaged glass can not be handled must be used with caution.


2, to avoid long-term pressure in the toughened glass state

In order to interior beauty, many families will choose to use the glass as a desktop table, coffee table, generally tempered glass to withstand the pressure in the 70mpa to 100mpa between the pressure multiplied by the glass pressure area is its ability to withstand the maximum pressure. Into the product quality = (pressure * area) / 10, if not necessary, do not re-tempered glass desktop long-term placement of heavy objects, to avoid the pressure value reaches the critical point leading to broken glass.

3, to avoid uneven hot and cold

If in extreme conditions, at both ends of a piece of glass were applied to the high temperature and low temperature, then 90% of this glass will blew, such as lit incandescent lamps pouring cold water, incandescent glass will break. Although for the tempered glass for this situation will be very small, but not afraid of ten thousand afraid of the event.


Source from www.sggglassmanufacturer.com