banner 2
certification banner
banner sss
banner 3
Home > News > Industry News > What's the requirements should.....


What's the requirements should comply with glass handling?

  • Author:Bella Zhang
  • Source:www.sggglassmanufacturer.com
  • Release on:2016-11-29
1. Before handling the glass, you should check whether there is any crack in the glass, especially pay attention to the cleft, confirm it is good condition with carried.

2. Handle the glass with gloves or cloth, paper on glass to separate glass with the exposed part of the body. If the number is large, the glass should be boxed before handling. Glass should upright in the box and the bottom and surrounded by plastic film or other soft items. Two or more people carry a larger heavier glass crates, should keep same speed and take care of each other.

3. For the hidden frame curtain walls, if the glass and aluminum frame is bonded in the workshop, should wait the structure cavity cured before handling. The hidden frame facade glass are normally produced by 8mm+8mm low e insulated glass curtain wall or 6mm+6mm low e insulated glass facade.
4. If the curtain wall glass size is too large, should use a special lifting equipment for handling.

5. When the wind is at or above level 5, it is difficult to control the glass, should stop handling and installation of the glass.

If you have any questions about glass, please fell free to contact us.

Source from www.sggglassmanufacturer.com