banner 2
certification banner
banner sss
banner 3
Home > News > Product News > What should we pay attention t.....


What should we pay attention to the processing of curtain wall glass?

  • Author:Brenda
  • Source:www.sggglassmanufactuer.com
  • Release on:2017-07-19
The glass type for curtain wall

The glass which used as curtain wall must be safety glass, for example, toughened glass, laminated glass, tempered insulated glass and so on. These glass should be custom-made by factory according to the design strictly.

We should pay attention to the following points for safety:
1.The glass should be edge treated to prevent rupture because of concentration of stress. But it doesn't allow cutting, punching, digging when installing. We should be clear that tempered glass can not be cut any more, even grinding edges, or other processing. Thus all design details of toughened glass must be confirmed before mass production. Like edge polishing, drilling holes, cut outs, etc.

2.After gel injection , the glass panel should be placed in the resting place for maintenance, the two-component structural adhesive should be allowed to place for 3 days. And the one-component structural adhesive should be allowed to place for 7 days before transport. After being transported to the scene room, it should continue to be placed for 14 to 21 days before they can be installed.

3.The thickness of the weathering seal shall be not less than 3.5mm and the width shall not be less than 7mm. In order to avoid the three sides are pasted, we should place the adhesive tape on the bottom, so that it won’t be glued and can prevent the colloid pull off and causing leakage.

If you are interested in more information about glass, welcome to visit our website: www.sggglassmanufactuer.com

curtain wall glass, Low E insulated glass, tempered glass curtain wall